Diamond Cutting Disc Turbo Beton 230x22․23x9 Elite Activ - 910020

Description Diamond Cutting Disc Turbo Beton 230x22․23x9 Elite Activ

Diamond Cutting Disc Turbo 230 Beton 10170085391

• Disc diameter: 230 mm.
• Arbor diameter: 22,23 mm.
• Blade width: 9mm is diamond-tipped.
• Disc thickness: 2,6mm.
• Maximum rotation speed: 6650RPM.
• Maximum speed: 80m/s.
• Cooling: without cooling.
• Materials for use: Brick, Unreinforced concrete, Paving slabs․
• Packaged in a colored box

Toothed layer – instant start.

Updated version of the Turbo Beton disc

Now the end of the diamond-bearing layer is made in the form of teeth. This allows you to start working at high speed even without running in the disc.

The Turbo Beton diamond cutting wheel is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mainly used for cutting concrete and concrete products, as well as when working with bricks and paving slabs.

The range includes two versions of discs with an outer diameter of 125 and 230 millimeters. The disc is used on any angle grinder with a standard seat of 22.23 mm.

During practical use, the circle showed high performance indicators. The disc showed a sufficient resource of 40 linear meters, as well as a high operating speed of 45 linear cm per minute.

Note that the work was carried out when cutting M400 concrete with 8 mm reinforcement at a reinforcement density of 6 pcs / linear m.

Vertical - speed (running meters/min), horizontal - resource (running meters)

The data are given under the following conditions:

• concrete M400, reinforcement Ø12 mm, 6 pcs./1 running meter;

• Ø 230 mm;

• cutting depth - 6 cm;

• pendulum cutting method;

• serviceable angle grinder with a power of 2.5 kW and a rotation speed of 6500 rpm;

• air temperature +25 °C.

The data is for reference only. Under other operating conditions, the performance parameters may differ significantly.