Diamond cutting disc Turbo 125 Beton 125x22.22x8x2.2mm - 910017

Description Diamond cutting disc Turbo 125 Beton 125x22.22x8x2.2mm

Diamond cutting disc DISTAR Turbo 125 Beton 125x22.22x8x2.2mm

• Disc diameter 125 mm.
• Mounting hole diameter 22․22mm.
• The depth of the blade: 8 mm diamond․
• Disc thickness 2.2 mm.
• Maximum rotation speed 12250 rpm.
• Maximum speed 80 m/s.
• Cooling: Without cooling.
• Materials for use: Brick, Reinforced concrete, reinforced concrete.
• Packed in a color box.

Toothed layer – instant start.

Updated version of the Turbo Beton disc

Now the end of the diamond-bearing layer is made in the form of teeth. This allows you to start working at high speed even without running in the disc.

The Turbo Beton diamond cutting wheel is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mainly used for cutting concrete and concrete products, as well as when working with bricks and paving slabs.

The range includes two versions of discs with an outer diameter of 125 and 230 millimeters. The disc is used on any angle grinder with a standard seat of 22.22 mm.

During practical use, the circle showed high performance indicators. The disc showed a sufficient resource of 40 linear meters, as well as a high operating speed of 45 linear cm per minute.

It should be noted that the work was carried out by cutting M400 grade concrete with 8 mm reinforcement at a reinforcement density of 6 pcs/linear m.