Diamond Disc 230 mm Distar Bestseller Universal 14315129017

Description Diamond Disc 230 mm Distar Bestseller Universal 14315129017

Diamond Disc 230 mm Distar Bestseller Universal 14315129017

• Disc diameter: 230 mm.
• Arbor diameter: 22.23 mm.
• Number of segments: 16.
• Blade width: 12 mm.
• Disc thickness: 2.6 mm.
• Maximum rotation speed: 6650 RPM.
• Maximum speed: 80 m/s.
• Cooling: without cooling.
• Materials for use: Granite, reinforced concrete, paving slabs․
• Compatible with Angle grinder.
• Packaged in a colored box

The 1A1RSS 230 Universal diamond wheel is a tool for large hand grinders. The specific feature of the disc is its outer diameter of 230 mm. and the opportunity to work with a wide range of building materials.

The disc is very good for cutting concrete, sandstone, colored granite, paving slabs and reinforced concrete. Some circles of this diameter have a diamond layer thickness of only 1.8 mm. This allows you to handle some types of granite and sandstone faster.

The Bestseller disc class, it is purchased for household work, but professionals often use such diamond discs in their work. The increased characteristics and the level of reinforcement passage are the advantages of the model.

The circle is used only for dry cutting, so breaks are needed in the work. The turbo segment edge allowed to increase the cutting efficiency on reinforced concrete and sandstone. Combining this with a layer height of 12 mm. we get an excellent universal disc for the builder.

Distinctive features of the 1A1RSS 230 Universal diamond cutting disc :

Universal disk for construction work;

Increased cutting speed and low resource consumption;

The disc is made especially for professionals;

Any type of granite can be cut.

The 1A1RSS 230 Universal turbo segment disc, like other Distar discs, is guaranteed for 3 years. In the event of a change in the design of the circle, its diameter and properties, the manufacturer is not responsible for malfunctions and rapid wear of diamonds.

The disk segments are made in such a way that they remove some of the dust that accumulates on the surface. Do not forget about safety glasses when working with any materials.

Wet cutting is not used when cutting with this disc. Dry cutting only, with breaks after 4 minutes of operation. When the tool stops completely, leave it for a couple of minutes, and then start working again.

The disk's operating instructions and safety precautions are enclosed inside the package. Read all the materials carefully and only then get to work!