Diamond Disc 100 mm Distar 10115029020 - 910028 - 10115029020

Description Diamond Disc 100 mm Distar 10115029020

Diamond Disc 100 mm Distar 10115029020

• Disc diameter: 100 mm.
• Arbor diameter: 22.2 mm.
• Blade width: 10 mm.
• Disc thickness: 1.2 mm.
• Maximum rotation speed: 15050 RPM.
• Maximum speed: 80 m/s.
• Cooling: dry cut.
• Materials for use: Porcelain tiles ․
• Compatible with Angle grinder.
• Packaged in a colored box

Purity even on the glaze

Chipping is the main difficulty when cutting glazed, glossy tiles, and tempered porcelain stoneware. The decisive factor in the purity of the cutting is the diamond disc.

The Elegant disc is the best solution for finishing cutting of complex materials.

The disc uses a very fine diamond and a self-sharpening bundle. The small diameter of the disc of 100 mm creates advantages for finishing cutting in comparison with the diameters of 115 and 125 mm, since it practically does not move away, the disc has minimal vibrations.

The disc provides such a clean cut that it is almost impossible to find even minimal chips, including on glazed tiles. No further edge processing is required. The disc also leaves no chips on the reverse mounting side of the tile. This is especially important in the manufacture of countertops and ceramic furniture.

This is the cleanest disc from the entire Distar line. Install and enjoy the result.

The disc is used on manual earphones without the use of cooling.