Mon-Fri from 09:00 to 18:00,
A detailed buying guide: how to choose engine-powered concrete equipment: mixer, vibrator, screed and power trowel.
This section covers petrol vibrating screeds for compacting freshly placed concrete and levelling the surface. They are used when pouring floors, yards, pavements, car parks and road slabs, when a flat and dense surface is needed quickly. The category is aimed at construction crews and concrete contractors. For mixing concrete, read how to choose a concrete mixer.
The most common type is the hand-held screed with an engine, handles and an interchangeable aluminium blade, which the operator pulls along. For large areas there are also double-beam and truss screeds that run on guide rails.
Blade length is usually 1–4 m, and many models let you swap it to match the width of the strip being poured. A vibrating screed effectively compacts layers up to 10–15 cm thick, while thicker slabs also need an internal concrete vibrator. See how to choose a concrete vibrator.
Vibration frequency is usually 4000–9000 vpm, with a centrifugal force of 1–3 kN. Throttle control lets you match vibration to the workability of the concrete so the surface does not segregate.
Vibrating screeds usually use compact four-stroke or two-stroke engines of 25–40 cm³ rated at 0.7–1.2 kW. A four-stroke engine needs no fuel mix and runs quieter. Read differences between two-stroke, four-stroke and diesel engines and engine displacement, power, torque and RPM: how to compare engine-powered equipment.
A hand-held screed with its blade usually weighs 12–25 kg. Height-adjustable handles, anti-vibration mounts and a throttle lever on the handle reduce fatigue. Read how to choose work gloves and how to choose safety footwear and protective rubber boots.
Vibrating screeds start with a manual recoil starter, and the fuel tank is usually 0.6–1 l, enough for 1–2 hours of work. Two-stroke models need the correct mix. Read fuel, engine oil and two-stroke mix: how to choose and use them correctly.
During long sessions, vibration and 90–100 dB noise call for breaks and hearing protection, and fresh concrete can irritate the skin. Read how to safely use internal-combustion-engine tools and equipment and how to choose hearing protection.
Wash concrete residue off the blade immediately after work, check the vibrator mountings and change the engine oil regularly. Read how to maintain and store motor tools and engine-powered equipment and how to choose spare parts for gasoline and diesel engines.
At ToolsArmenia you can compare petrol vibrating screeds by blade length, vibration frequency, engine and weight and choose the right model for your concrete work.
There are no products to list in this category.
