0
0
Cart
Your shopping cart is empty!
It's never too late to make things right :)

Plastering Stations: Machine Plastering with Gypsum and Cement Mixes

Top
Plastering station Kaleta K152 / 2.2 kW / 230 W/
Plastering station Kaleta K152 / 2.2 kW / 230 W/ Plastering station Kaleta K152 / 2.2 kW / 230 W/ Plastering station Kaleta K152 / 2.2 kW / 230 W/ Plastering station Kaleta K152 / 2.2 kW / 230 W/ Plastering station Kaleta K152 / 2.2 kW / 230 W/
Model: Kaleta K152
In stock
1,405,000֏
Capacity of loading bunker kg:: 57
Compressor capacity of the station in l/min: 61
Material: Stainless steel
Weight kg: 85
Top
Plastering station Stirex PS380
Plastering station Stirex PS380 Plastering station Stirex PS380 Plastering station Stirex PS380
Model: Stirex PS380
In stock
2,750,000֏
Capacity of loading bunker kg:: 75
Compressor capacity of the station in l/min: 300
Material: Stainless steel
Weight kg: 280
Top
Innotek-04 plastering machine, 380 V, 5.5 kW
Innotek-04 plastering machine, 380 V, 5.5 kW
Model: 04
In stock
2,777,800֏
Hit
Top
Plastering station Kaleta K5S / 5.5 kW / 400 W/
Plastering station Kaleta K5S / 5.5 kW / 400 W/
Model: Kaleta K5S
In stock
3,540,000֏
Capacity of loading bunker kg:: 135
Compressor capacity of the station in l/min: 250
Material: Stainless steel
Weight kg: 250
Top
Innotek-07 plastering machine, 380 V, 6 kW
Innotek-07 plastering machine, 380 V, 6 kW
Model: 07
Out Of Stock
2,888,912֏
Top
Innotek-02 plastering machine, 220 V, 4.3 kW
Innotek-02 plastering machine, 220 V, 4.3 kW
Model: 02
Out Of Stock
3,000,024֏
Top
Innotek Monster plastering machine, 380 V, 7.5 kW
Innotek Monster plastering machine, 380 V, 7.5 kW
Model: PRO
Out Of Stock
3,111,136֏
Top
Innotek Multi plastering machine, 380 / 220 V
Innotek Multi plastering machine, 380 / 220 V
Model: RIMO
Out Of Stock
3,111,136֏
Top
Plastering station M-tec M280 5.5 kW
Plastering station M-tec M280 5.5 kW Plastering station M-tec M280 5.5 kW Plastering station M-tec M280 5.5 kW
Model: 611000/200
Out Of Stock
3,400,000֏
Capacity of loading bunker kg:: 105
Compressor capacity of the station in l/min: 300
Material: Stainless steel
Weight kg: 210
Hit
Top
Plastering station (Multivoltage) KALETA K4 230/400 / 4 kW /
Model: KALETA K4
Out Of Stock
3,460,700֏
Capacity of loading bunker kg:: 75
Compressor capacity of the station in l/min: 300
Material: Stainless steel
Weight kg: 160
Top
Plastering station Stirex  AG500 / 5.5 kW / 400 W/
Model: Stirex AG500
Out Of Stock
3,540,000֏
Capacity of loading bunker kg:: 135
Compressor capacity of the station in l/min: 280
Material: Stainless steel
Weight kg: 320

Plastering Stations: Machine Plastering with Gypsum and Cement Mixes

Plastering stations

A detailed buying guide: how to choose a plastering machine.

This section presents plastering stations for automatically mixing, pumping and spraying gypsum and cement dry mixes onto walls and ceilings. The stations are used for machine plastering, screeding and filler work by construction companies, finishing crews and contractors. A plastering station speeds up the work several times compared with manual application and ensures consistent mix quality and an even layer. Construction mixers, concrete mixers, paint sprayers and compressors are found in other sections.

What to consider when choosing a plastering station

Station type and mix

Screw-type (stator-rotor) plastering stations suit gypsum and cement plasters, adhesives and self-levelling compounds, while mortar pumps work with ready-mixed mortar. Small sites need about 10–25 l/min output, while large volumes call for 30–60 l/min or more. See what is performance or output.

Pressure, delivery distance and hoses

Mortar delivery pressure is usually 20–40 bar, allowing the mix to be pumped about 15–50 m horizontally and 10–20 m vertically depending on the mix and hose diameter (usually 25 or 35 mm). A pressure gauge and pressure protection prevent blockages and hose bursts. Read what is working pressure.

Power supply: 220 V or 380 V

Most stations run on a 380–400 V three-phase supply with a total power of about 5–8 kW, while light models use a 220–230 V single-phase supply. Check the site supply, cable cross-section and plug type, and when working from a generator choose one with a power margin. See how to choose sockets, plugs, extension leads and power strips.

Compressor and water supply

Spraying requires a built-in or external compressor delivering about 200–300 l/min, and the water supply must provide a stable pressure of about 2.5 bar or more or work through a water pump. The air hose and connectors must match the spray gun. Read how to choose an air compressor and how to choose an air hose and connectors.

Safe operation and PPE

Wear safety glasses, gloves and a respirator, as dry mix is dusty and alkaline. Never disconnect hoses or couplings under pressure, and switch off the power and release the pressure before servicing. See how to choose personal protective equipment and how to choose a respirator.

Maintenance and wear parts

After each job thoroughly wash the mixing chamber, pump and hoses, as hardened mortar ruins the stator and rotor. The stator-rotor pair, mixing shaft and seals are wear parts, so prefer models for which spare parts are available. Read how to choose spare parts for light construction equipment and which spare parts and service kits are replaced during preventive maintenance.

At ToolsArmenia you can compare plastering stations by output, delivery pressure and distance, power supply and mix type and choose the right station for your projects.

icon_viber icon_teleg icon_callback icon_email icon_mes icon_skype