Mon-Fri from 09:00 to 18:00,
A detailed buying guide: how to choose a pneumatic nail gun.
This section covers pneumatic staplers and nailers for staples, brad and finish nails, pins, framing and coil nails that fasten wood, plywood, chipboard, fabric and membranes quickly and accurately. They are used in cabinet and upholstered furniture production, roofing, wall and floor work, crate making and interior finishing. Air models are light, fast and durable and need no battery or cord, but they only work with a matching electric or petrol compressor. For more on air tools, read what pneumatic tools are and how they work.
Staplers fasten fabric, plywood and membranes with staples, brad and pin nailers fix skirting and trim, and framing and coil nailers build timber frames, roofs and crates. Choose the type by your main job. See how to choose manual fastening tools: staplers, riveters and applicator guns.
Upholstery staplers use narrow 6–16 mm staples, brad nailers 15–50 mm nails, pin nailers 10–30 mm pins and framing nailers 50–90 mm nails. The fastener series and length must match the tool specification. Read how to choose an electric tacker or nailer: fastener type, length, and firing rate.
Tool-free depth adjustment lets you sink the nail flush, and the safety contact tip prevents firing into the air. Sequential mode is safer, while contact mode speeds up roofing and crate work. See how to use pneumatic tools safely.
Staplers and nailers use air only when firing, so a household compressor with a 24–50 l tank is enough for small models, while framing nailers need a higher-output unit. Read how to choose an air compressor and how to calculate compressor air delivery.
Most tools operate within 4–7 bar: set the pressure with a regulator according to material hardness and fastener length. Excess pressure damages the surface and speeds up wear. See how to choose compressor working pressure.
The tools have a 1/4" inlet for a EURO, ORION or RAPID coupler, and a light PU recoil hose is handy on roofs and ladders. Use a filter-water separator and put a few drops of air tool oil into the inlet every day. Read how to choose an air hose and connectors and how to prepare compressed air: condensate, filters, regulators, and lubricators.
An aluminium body, rubberised grip, adjustable exhaust and fastener-low indicator make long work easier. Because of ricochet risk and noise, always wear safety glasses and ear protection. See how to choose safety glasses and how to choose hearing protection.
Always disconnect the air before clearing a jam or loading the magazine, and drain the compressor condensate after work. A worn driver blade, seals and bumper can be replaced with spare parts. Read how to choose spare parts for pneumatic and hydraulic tools and how to use an air compressor safely.
At ToolsArmenia you can compare pneumatic staplers and nailers by fastener type and length, magazine capacity, working pressure and weight and choose a model that suits your jobs and compressor.
There are no products to list in this category.
