Mon-Fri from 09:00 to 18:00,
A detailed buying guide: how to choose an air compressor.
This section covers electric air compressors: piston and rotary screw, oil-lubricated and oil-free, direct-drive and belt-drive, with horizontal or vertical tanks or tankless, with 220 V or 380 V power supply, as well as mini airbrush compressors and compressor kits with air tools. They supply compressed air to pneumatic tools, spray and blow guns and tyre inflators, and suit car service, construction, workshop and home jobs. If you are new to this equipment, start with what pneumatic tools are and how they work.
A piston compressor is an affordable and compact choice for home, car service and workshop use, but it runs intermittently, while small diaphragm compressors are designed for airbrushing. A rotary screw compressor is designed for continuous operation and a large, steady compressed air demand, runs more quietly and is usually installed in production halls and large service centres. Learn more: differences between piston and rotary screw compressors.
An oil-lubricated compressor is more durable in long and frequent operation, but it needs oil level checks and leaves traces of oil in the air. An oil-free model is lighter, needs almost no maintenance and suits short jobs and tasks that require clean air. Learn more: differences between oil and oil-free compressors.
A direct-drive (coaxial) compressor is compact and affordable, but it runs at high speed, heats up more and is louder. In a belt-drive model the pump turns more slowly, so it is better suited to intensive and long working sessions. See: differences between direct-drive and belt-drive compressors.
The compressor air delivery (l/min) should exceed the air consumption of the connected tool with a margin. Keep in mind that manufacturers often state the intake rating, while the real output of a piston compressor is lower. It helps to know how to calculate compressor air delivery.
Most pneumatic tools work at about 6–6.3 bar, while compressors usually deliver a maximum pressure of 8–10 bar. A pressure reserve keeps the tool running steadily even with a long hose. Read: what is working pressure and how to choose compressor working pressure.
The tank stores compressed air and smooths out pressure fluctuations; a vertical tank saves floor space, while tankless models suit airbrushing and tyre inflation. A small tank is enough for tyre inflation, blowing and short jobs, while spray painting, sanding and tools with continuous air demand need a larger one. Guide: how to choose compressor tank capacity.
Household and semi-professional models run on a 220 V mains supply, while powerful belt-drive and rotary screw compressors often need a 380 V three-phase supply. Check the circuit breaker, because the motor draws a high current at start-up. See: volt (V) and how to use an extension cord safely.
Piston compressors are designed for intermittent use, with working cycles alternating with cooling breaks, while rotary screw units can run continuously. When working indoors, compare noise levels: low-noise oil-free models are noticeably quieter. Learn more: what is noise level in db.
Spray painting and precision pneumatic tools need clean, dry air from a water separator, filter and pressure regulator, and some tools also need a lubricator. The outlet quick coupler and hose diameter must match your tools. Read: how to prepare compressed air: condensate, filters, regulators, and lubricators and how to choose an air hose and connectors.
Drain the condensate from the tank after work, check the air filter regularly, check the oil level on oil-lubricated models and never exceed the permitted pressure. Read: how to use an air compressor safely, how to store and maintain an air compressor and how to choose compressor spare parts and service kits.
At ToolsArmenia you can compare air compressors by air delivery, working pressure, tank size, drive type and power supply and choose a model that matches your tools and workload.
