Pneumatic chipping hammer MOP-2 (TZK) - Mop-2 - Mop-2

Name: Impact hammers - Pneumatic chipping hammer MOP-2 (TZK) - Mop-2
SKU: Mop-2
Price: 215500 AMD

Filter

- Pneumatic chipping hammer MOP-2 (TZK) - Mop-2 - Impact hammers

Hit

Top

Out Of Stock

Model: Mop-2

Vendor code: Mop-2

215,500֏

Price in reward points: 215500

Found it cheaper?

2155 points to the account

Short description

Pneumatic Demolition Hammer / 39 J / MOP-2 (TZK) Main Specifications Type—pneumatic demolition hammer. Power Supply—compressed air (from a compressor). Impact E...

Description Pneumatic chipping hammer MOP-2 (TZK)

Pneumatic Demolition Hammer / 39 J / MOP-2 (TZK)

Main Specifications

Type—pneumatic demolition hammer.
Power Supply—compressed air (from a compressor).
Impact Energy—39 J.
Purpose—for demolition and removal works on hard materials.

Technical Data

Operating Pressure—0.3–0.5 MPa.
Impact Frequency—approx. 22.5 s⁻¹ (approx. 1350 bpm).
Air Consumption—approx. 1.35 m³/min.
Equivalent Power—approx. 875 W.
Tool Length—approx. 510 mm.
Weight—approx. 7.4 kg.
Tool Shank (DxL)—24×70 mm.

Features

Pneumatic drive—stable performance under continuous load.
High productivity—suitable for concrete, brick, stone and similar materials.
Optimized weight—comfortable for long working sessions.
Accessories dependency—chisels/accessories may vary depending on the supply.

Service & Safety

Compressor—keep air pressure within 0.3–0.5 MPa.
Lubrication—use an in-line lubricator to protect internal parts.
Air cleanliness—an air filter/moisture separator is recommended to extend service life.
Safety—use safety glasses and gloves during operation.

Main Specifications

Type—pneumatic demolition hammer.
Power Supply—compressed air (from a compressor).
Impact Energy—39 J.
Purpose—for demolition and removal works on hard materials.

Technical Data

Operating Pressure—0.3–0.5 MPa.
Impact Frequency—approx. 22.5 s⁻¹ (approx. 1350 bpm).
Air Consumption—approx. 1.35 m³/min.
Equivalent Power—approx. 875 W.
Tool Length—approx. 510 mm.
Weight—approx. 7.4 kg.
Tool Shank (DxL)—24×70 mm.

Features

Pneumatic drive—stable performance under continuous load.
High productivity—suitable for concrete, brick, stone and similar materials.
Optimized weight—comfortable for long working sessions.
Accessories dependency—chisels/accessories may vary depending on the supply.

Service & Safety

Compressor—keep air pressure within 0.3–0.5 MPa.
Lubrication—use an in-line lubricator to protect internal parts.
Air cleanliness—an air filter/moisture separator is recommended to extend service life.
Safety—use safety glasses and gloves during operation.