Diamond cutting disc 1A1R 125x22.22x8x1mm ESTHETE - 910031 - 11115421010

Description Diamond cutting disc 1A1R 125x22.22x8x1mm ESTHETE

Diamond cutting disc 1A1R 125 ESTHETE

• Disc diameter 125 mm.
• Mounting hole diameter 22․22mm.
• The depth of the blade: 8 mm diamond, the thickness of which is 1.1 mm.
• Disc thickness 0.8 mm.
• Maximum rotation speed 12250 rpm.
• Maximum speed 80 m/s.
• Cooling: Without cooling.
• Materials for use: Ceramics, Porcelain tiles.
• Packed in a color box.

The DISTAR 1A1R ESTHETE diamond disc is used for cutting ceramic materials with decorative coatings.

Equipped with an ultra-thin diamond-bearing layer of 1.1 mm, which allows cutting tiles even with a soft glazed coating.

The diamond-bearing layer is equipped with fine diamond grain. The disc makes such a clean cut that in most cases it can even replace a tile cutting machine.

The disc is available in two variations on the market, with a diameter of 125 and 115 mm, which makes it possible to use it on any angle grinder models with a standard mounting mount.

The new design of the disc with the effect of a 'transparent body in the cut' allows you to control the cutting line.

The disc body, reinforced with a flange, ensures confident cutting of hard ceramic tiles.

Laser segmentation provides effective cooling of the cutting layer.

Vertical - speed (running meters/min), horizontal - edge quality

The data are given under the following conditions:

• porcelain stoneware, 10 mm;

• Ø 125 mm;

• serviceable angle grinder with a power of 1.4 kW, with a rotation speed of 11,000 rpm;

• air temperature +25 C°.

The data is for reference only. Under other operating conditions, the performance parameters may differ significantly

/ # / — Edge quality

/ 3 / — Average

/ 4 / — Good

/ 5 / — Excellent