Mon-Fri from 09:00 to 18:00,
A detailed buying guide: how to choose a metal cut-off or band saw.
This section covers mains-powered stationary saws for cutting metal pipes, profiles, angles and rebar: 355 mm abrasive cut-off saws, cold-cut saws with a steel blade and horizontal metal band saws. For an overview, read what electrical equipment is and how it is classified.
An abrasive cut-off saw is affordable and fast but throws sparks and heats the cut, a cold-cut saw gives a clean cut without sparks, and a horizontal band saw suits large sections and batch cutting. On metal cutting discs: how to choose a metal cutting disc.
A standard cut-off saw uses a 355 mm disc with a 25.4 mm bore, whose rated speed must never be exceeded. Read how to choose the correct disc diameter and how to read disc markings.
Quick-release vises hold the workpiece firmly, while swivelling vises or bases allow 45° cuts. Check the maximum round and square cutting capacity. On vises: how to choose clamps, vises and holding tools.
355 mm cut-off saws are rated at roughly 2000–2600 W and run on 220 V, while industrial band saws and cold-cut saws may require 380 V. See how to choose tool power (W) and volt (V).
Abrasive cutting throws sparks several metres, so remove flammable materials and keep a fire extinguisher at hand. Read essential fire safety rules and how to choose fire safety equipment.
A disc guard, no-volt release and a brake reduce the risk of injury. See what is anti-restart and what is an electronic brake.
Clamp the workpiece in the vise, never force the disc, let the cut piece cool and wear safety glasses or a face shield and hearing protection. Read how to work safely with stationary machines, how to choose safety glasses and how to choose hearing protection.
At ToolsArmenia you can compare metal cutting saws by type, disc size, maximum cutting capacity and power and choose the right model for your workshop or site.
