0
0
Cart
Your shopping cart is empty!
It's never too late to make things right :)

How to Choose an Electric Heat Blower or Space Heater for the Home, Workshop and Building Site

ToolsArmenia Knowledge Base

How to Choose an Electric Heat Blower or Space Heater for the Home, Workshop and Building Site

An electric heater burns no fuel, gives off no fumes and can run in a closed room. The right choice depends on the room volume, insulation, the available power supply and how quickly the space has to warm up.

Reading time: about 8 min Updated: November 2026 ToolsArmenia Editorial Team

What electric heat blowers and space heaters are

An electric heat blower is a heater with a powerful fan: it warms the air quickly and spreads it through the room in a directed stream. Small models are called fan heaters, and the most common quiet heater without a fan is the oil-filled radiator.

Electric heaters are used at home, in warehouses, workshops, garages and on building sites, including for drying plaster, paint and mortar. Because there are no combustion products, they are the safest option for living areas and poorly ventilated rooms. The general classification of electrical equipment is covered in the equipment selection section.

Important

The heater rating in kW is both its heat output and its power consumption: for an electric heater the two are practically equal.

Selection criteria

Heat output and room volume

A rule of thumb is 1 kW per about 10 m² with a 2.5–2.7 m ceiling and normal insulation. A poorly insulated warehouse or site may need twice as much. The exact calculation by volume and temperature difference is explained in the heater output calculation article.

Supply: 220 V or 380 V

Heaters up to about 3 kW run from a standard 220 V socket. Heat blowers of 5 kW and more are often three-phase (380 V) and need a suitable line and circuit breaker. Check what voltage and current are available on site.

Heating element type

An open coil heats fast but dries the air and burns dust. A tubular element lasts longer, and a ceramic PTC element is self-limiting and safer. The differences are covered in the heater types article.

Modes and thermostat

It helps to have several power steps (for example 0 / 1.5 / 3 kW), a fan-only mode and a thermostat that holds the set temperature and saves energy.

Protections and housing

Check overheating protection, tip-over shut-off and a metal housing for site use. In damp rooms the IP rating matters.

Warning

Never cover a heater, dry clothes on it or place it closer than 1 m to flammable materials. Do not run a powerful heater through a coiled extension reel.

Comparing options

Below are the main types of electric heaters and the jobs they suit.

TypeBest forAdvantageWhat to check
Electric heat blowerWarehouse, garage, site, dryingFast heating, strong airflow220/380 V supply, housing, protections
Fan heaterSmall room, officeCompact, affordable, fastNoise, thermostat, tip-over protection
Oil-filled radiatorBedroom, apartment, long runningSilent, does not burn dustNumber of fins, wheels, thermostat
ConvectorConstant background heatingEven heat, wall mountingThermostat, IP rating

Common mistakes

  • Choosing output by floor area only, ignoring ceiling height and insulation.
  • Buying a three-phase heat blower when only 220 V is available.
  • Running a powerful heater through a thin or coiled extension cord.
  • Putting a noisy site heat blower in a living room.
  • Ignoring the thermostat and tip-over shut-off.

Good practice

For a living room choose an oil-filled radiator with a thermostat or a ceramic fan heater; for a warehouse or site choose a metal-housed electric heat blower with the right supply.

Final checklist

  • I have calculated the required output from volume and insulation
  • I have checked the supply: 220 V or 380 V
  • I have chosen the heating element type for the job
  • There is a thermostat and power steps
  • There is overheating and tip-over protection
  • I have a cable or socket of suitable cross-section

Frequently asked questions

What heater output does a 20 m² room need

With a standard ceiling and normal insulation about 2 kW is enough. For a poorly insulated room choose 3 kW or more.

Can an electric heat blower be used in a living room

Yes, it produces no combustion gases. But a site heat blower is noisy, so an oil-filled radiator or fan heater is more comfortable for living rooms.

Why are 5 kW heat blowers often 380 V

At high power the current on a single-phase line becomes too large, so the load is split across three phases.

Which is more economical, a heat blower or a radiator

At the same output the energy use is the same. Savings come from a thermostat, correct sizing and room insulation.

What if the heater switches off by itself

Usually the overheating protection has tripped. Make sure the air inlet and outlet are not blocked, and read about thermal protection.

Prepared by the ToolsArmenia Editorial Team. A correctly chosen heater gives fast, safe warmth without unnecessary electricity use.
0
44948
10 November, 2026
Comments0

Write a review

Note: HTML is not translated!
icon_viber icon_teleg icon_callback icon_email icon_mes icon_skype